* SCEPTRE AMENDMENT UCSP_550_003/1
* Release: 5.5
* Date: 12 MARCH 1999
*
* Sceptre-Overlord may fail with one of the program errors:
*       PE 9.0 at displacement X3A5C in IIN 2 of module ICL8UCS9MON,
*       PE 9.0 at displacement X3B9A in IIN 2 of module ICL8UCS9MON
*
* This may happen if a TPMS service module has been loaded using
* the prepared names added to the module by UCSPREPARESERVICE, and
* TPMS message-type meters for this service are used in the OSDL.
*
* The amendment UCS_P550_003/1 below corrects this error.  Please
* apply it using the procedure described in the Software Notice
* issued with the Sceptre software.
* This amendment applies to both SCEPTRE and SCEPTRE-E.
*
* Module to be amended is: ICL8UCS9MON(5500)
*
POINT(UCS093.PATCHES)
ALTER(003,X00,XF1,NAME=UCS_P550_003/1_P00)
AREA(UCS932.1)
PATCH(X21C,X179C20A6,CODE * LINE 96
    LSS.L    X26    * DESCR ADDRESS
    IAD      1
    JNZ      #A     * JUMP IF FIXED UP
    RETURN   8
#A  MODD.B          * OVERWRITTEN
    ADB.L    X26    * OVERWRITTEN
END,RET=YES,NAME=UCS_P550_003/1_P01)
 
PATCH(X35A,X179C20A6,CODE  * LINE 121
    LSS.L    X26    * DESCR ADDRESS
    IAD      1
    JNZ      #A     * JUMP IF FIXED UP
    RETURN   8
#A  MODD.B          * OVERWRITTEN
    ADB.L    X26    * OVERWRITTEN
END,RET=YES,NAME=UCS_P550_003/1_P02)
CHE(C3A1368B)